|
‘NOT YOUR AVERAGE ROLLER SHUTTER’ best describes the Centurion 2000 Roller Shutters manufactured at our Cameron Park factory.
After rigorous testing on prototype vehicles, our Centurion 2000 Roller Shutters have been specified & supplied onto fire appliances to almost all Fire Services throughout Australia & New Zealand as well as State Emergency Service, Airport Crash Tenders & Mines Fire/Rescue appliances.
Whether it is for an ‘Urban Pumper’, ‘Aerial Appliance’, ‘Bushfire Response 4WD’ or ‘Rescue Unit’, our Century 2000 Roller Shutters are there on the front-line. Our greatest critics are the end-users, the fire-fighters & emergency workers who put our products to the test under the most extreme conditions almost every day of the week. We seek their comments whenever we can to ensure that we are still getting it right & that feedback tells us that we are. As a result we are now supplying the Centurion 2000 Roller Shutters to other fleet users such as Utility Companies.
| |
|
 |
|
The Centurion 2000 Roller Shutter is manufactured from prime billet aluminium that is extruded & anodised to our specifications. The shutter curtain is a ‘Box Lath’ construction that ensures the back of the shutter is smooth ensuring loose equipment does not jam the shutter operation. The shutter is fully sealed with top, side & latch seals. The latch assembly is an exclusive design that always ensures full contact by gloved or un-gloved hand without the danger of jamming fingers or hands plus a very positive opening & closing mechanism. Full traceability of every individual shutter we manufacture ensures a speedy response & minimal vehicle downtime if shutters are damaged.
A number of options are available such as Key locks, Central Locking, ‘Shutter Open’ Alarm Switches plus ‘Litstrip’ & ‘LED’ Cabinet Lighting.
Please contact us to tell us your shutter specifications for price & availability or visit our Shutter Order Form page.
 |
Shutter Guard
Shutter Guard is designed to give clear indication if the shutter has not been fully closed and locked.
Incorporated within the door strike plate is an infra-red sensor. This is linked to integral solid state circuitry to allow switching of both locker compartment lights and to provide crew cab warning when door is not latched.
- Warning of shutter not secured
- Active non-contact sensing
- Integrated switching facility
- 10 amp peak load rating
(5amp continuous)
- LED active indicator
- Fully sealed
|
|
| |
Central Locking
The system is electrically operated and is available for 12 or 24 volt. To meet
operational needs the system will fail-safe to the unlocked condition in the event of the power supply being interrupted.
- Electrical powered 24V or
12V options
- Fail-safe operation
- Intelligent power monitoring and conservation system
- Shutters and hinged doors
including crew cab are covered
- Secondary control point option
- Low & high level lock options
- Will control up to 9 shutters
per vehicle
- Single wire ring main
|
|
.jpg) |
Lit-Strip
Lit-Strip provides even ambient lighting throughout the locker regardless of equipment stowage, shelving etc. The system gives enough light where needed with minimal effect on night vision.
- Ambient Illumination for the whole locker
- Not affected by shelves or trays
- Anti-glare light levels help maintain night vision
- More locker stowage space
- Well protected against accidental damage
- 12 or 24 volt operation
- Put through 120,000 cycle test, (equivalent to being switched once a day for 328 years!)
- Up to 4,000 hours continuous bulb life
|
|
 |
Led-Strip
Available in 24 volt and 12 volt with a power consumption of 122 milliamps and 244 milliamps respectively per metre run. LED-Strip can be retro fitted in place of Lit-Strip using the existing Lit-Strip housing.
|
|
|
